Planter box drainage with geotextile.
A planter box needs to drain, or the roots sit in water and rot. The usual build is a drainage layer at the bottom and a sheet of non-woven geotextile on top of it, so water gets out and the soil stays in.
The short answer
Waterproof the inside of the box, add a drainage layer of gravel or drainage cells over the outlet, lay non-woven geotextile over the drainage layer with the edges turned up the sides, then fill with planting soil. A 130 gsm grade (ATX20) is the usual choice.
The layers in a planter box.
The geotextile is the filter between the soil and the drainage layer. Water passes down through it to the outlet; the soil stays above and doesn't wash into the gravel or block the outlet.
- Concrete box, waterproofed inside
- Drainage layer: gravel or drainage cell
- Non-woven geotextile, turned up the sides
- Planting soil
- Plants or turf
How to build it, step by step.
Check the outlet
Make sure the box has a drain outlet or weep holes at the bottom, and that water from them goes somewhere safe.
Waterproof the box
Waterproof the inside of a concrete box before anything goes in, especially on a balcony, roof or against a wall. Geotextile is not waterproofing.
Add the drainage layer
Lay gravel or plastic drainage cells over the base, around 50 to 100 mm deep. Cover the outlet so it can't block.
Cut the geotextile
Cut a piece the size of the box plus about 150 mm on each side, so the edges can turn up the walls.
Lay the fabric
Lay it over the drainage layer and turn the edges up the sides. Overlap joins by at least 150 mm.
Fill with soil
Fill with planting soil on top of the fabric. Leave space below the rim for mulch or turf.
Plant and water
Plant, then water well and check that water comes out of the outlet.
How much fabric per box?
Fabric size = box length plus 300 mm, by box width plus 300 mm, so the edges turn up 150 mm on each side.
| Box (length × width) | Fabric piece | Area |
|---|---|---|
| 1 × 0.5 m | 1.3 × 0.8 m | about 1 m² |
| 2 × 0.6 m | 2.3 × 0.9 m | about 2 m² |
| 3 × 0.6 m | 3.3 × 0.9 m | about 3 m² |
| 6 × 1 m | 6.3 × 1.3 m | about 8 m² |
| 10 × 1.5 m | 10.3 × 1.8 m | about 19 m² |
One 2 m × 100 m roll of ATX20 is 200 m² of fabric, enough for a whole row of house or condo planter boxes. Landscapers often keep a roll for planters and gardens.
Which grade for planter boxes?
The fabric in a planter box is a filter, not a load-bearing layer, so a light grade is enough.
- Planter boxes and garden beds
- 130 gsm (ATX20), made in Seremban and in stock.
- Roof gardens and large planters
- 150 gsm (ATX30), supplied to order, or follow the landscape architect's specification.
- Roll sizes
- ATX20: 2 m × 100 m and 2 m × 250 m, from a single roll.
- Catalogue
- Download the AeroTex catalogue (includes the data sheet). Test reports on request.
Why planter boxes waterlog.
When plants drown or the outlet leaks mud, it is usually one of these.
- No drainage layer · water sits in the bottom of the soil and roots rot
- No fabric over the gravel · soil washes into the gravel and blocks the outlet
- Fabric used as waterproofing · water goes straight through; waterproof the box first
- Edges not turned up · soil runs down the sides into the drainage layer
- Blocked outlet · check it before you fill the box with soil
Does geotextile stop roots?
Not for good. Non-woven geotextile slows roots down, but over time fine roots can grow into and through it. It is a filter to keep soil out of the drainage layer, not a root barrier.
Where roots could damage a wall, slab or waterproofing, such as trees in a planter on a podium, use a proper root barrier and follow the designer's detail.
Planters and gardens our customers have built.



Planter box questions.
Do planter boxes need geotextile?
If the box has a gravel or drainage-cell layer, yes. The geotextile goes on top of the drainage layer and keeps the soil from washing down and blocking it.
Where does the geotextile go in a planter box?
Between the drainage layer and the soil, with the edges turned up the sides of the box. It does not go under the drainage layer.
What gsm geotextile for a planter box?
130 gsm non-woven geotextile, such as AeroTex ATX20, is the usual grade for planter boxes and garden beds.
Is geotextile waterproof?
No. Geotextile lets water through on purpose. Waterproof a concrete planter box separately before you add the drainage layer and fabric.
Does geotextile fabric stop roots?
It slows them but doesn't stop them for good. Use a proper root barrier where roots could damage the structure.
Can I use landscape fabric or weed mat instead?
Woven weed mat lets water through more slowly and can clog with fine soil. Non-woven geotextile is the better filter over a drainage layer.
Where can I buy geotextile for planter boxes in Malaysia?
AeroTex makes ATX20 in Seremban and sells from a single roll with nationwide delivery. Send the box sizes and location on WhatsApp for a price.
Building planter boxes? Send us the sizes.
Tell us the box sizes, how many, and the delivery location. We reply with how much fabric you need and today's price.
© 2026 AeroTex™ Non-woven Geotextile. Made in Malaysia.
aerotex.my